Log in | My Account | ![]()
Cart: 0 items
| Our Code: DAKLCB-8-12/24 |
![]() ![]() |
New flexibility improves system economy. For the 12/24V models, the choice of array voltage is independent of pump voltage. The array can be 12, 24 or 36V, to match or step down to a 12 or 24V pump. Increasing the array voltage reduces the wire size requirement exponentially. If you have a long wire run, place the controller at the pump so the long run is at the higher voltage.
Applications include
Dankoff Solar Slowpump and Solar Force Piston Pump,
Solarjack SDS & Shurflo pumps, jack pumps, fans, blowers
Features
SPECIFICATIONS:
VOLTS IN 12 / 24 / 36V nominal
VOLTS OUT 15.0 / 30.0 regulated
MAX. CONTINUOUS CURRENT 8 amps
STARTING CURRENT (15 seconds) DL-8A 18 amps
OUTPUT FUSE Type ATC or ATO (automotive) 5 and 10 amp fuses are included
REMOTE SWITCHING (float switch) Load disconnects when switch MAKES contact. 5V circuit.2-conductor cable required. #18 wire can go 2000 ft.
EFFICIENCY >94% at rated load
TEMP RANGE -20°C to +60°C
LIGHTNING PROTECTION: MOV (varistors)
ENCLOSURE powder coated steel, rainproof
DIMENSIONS 6"x 6"x 3" (15.5x15.5x7.5 cm)
WIRE SIZE #18 to #12
KNOCK OUTS combination 1/2" & 3/4"
WARRANTY five years
“Eric exceeded my expectations by guiding me to the correct mounting brackets. He went out of his way by even going and measuring the parts in question to make sure they fit my non standard mount rails. The only way this could have been a better transaction is if Eric came over and helped with the install. Thanks!”
Steve - St Regis Falls, NY
“Thanks for the message, I feel like I have a friend in you and altE. I would not hesitate to recommend you to a friend.”
Bill - Ventura, CA
“I have ordered from your company before and have always received excellent service. Thank you so much! I'll be back again.”
Robert - Joshua Tree, CA