We are no longer offering this product.
The below information is presented for informational purposes only. You may also find similar items in the category.
- FEATURED PRODUCTS
- Solar Panels
- Solar Power Systems
- Productos Solares en Puerto Rico
- Charge Controllers
- Inverters
- Deep Cycle Batteries
- Solar Panel Mounts
- MORE PRODUCTS
- Cables & Wiring
- Enclosures, Electrical & Safety
- Inverter Power Panels & PreWired Systems
- Meters, Communications & Site Analysis
- Portable Power Systems
- Solar Water Pumps
- Voltage Converters
- Wind Turbines
- Books & Education
- * Clearance Sale *
- Hot Deals
- Open Box & Refurb Deals
Stiebel Eltron 80 Gallon Solar Hot Water Tank with Dual Heat Exchanger
| Item code | Brand name | Model number |
| STISBB300PLUS | Stiebel Eltron | SBB 300 Plus 80 Gal 2HE |
Stiebel Eltron
SBB 300 Plus
80 Gallon Solar Hot Water Tank w/Dual Heat Exchanger
The Stiebel Eltron SB/SBB series water heaters are indirectly fired and are equipped with either one or two large heat exchangers. The heat exchangers are heavy gauge steel with porcelain enamel coating. The models with a single heat exchanger can be used for solar applications with some form of external backup heater. On the models with dual heat exchangers, the upper coil is typically connected to a space heating boiler fired by any fuel and the lower coil is connected to the solar panels. All Stiebel Eltron SB/SBB series water heaters can also be used as high capacity indirectly fired water heaters in conjunction with any type of heating boiler.
FEATURES - SBB 300 Plus:
TECHNICAL DATA:
| SPECIFICATIONS | |
| Storage capacity | 80.6 gal | Volume of heat exchanger, Upper | 1.9 gal |
| Volume of heat exchanger, Lower | 2.7 gal | Working pressure | 150 psi / 10 bar |
| Tested to pressure | 217 psi / 15 bar | Max. pressure of boiler loop | 150 psi / 10 bar |
| Max. temp. upper loop | 266 °F / 130 °C | Max. temp. lower loop | 266 °F / 130 °C |
| Surface area of heat exchanger, upper | 1705 in 2 / 1.1 m 2 | Surface area of heat exchanger, lower | 2325 in 2 / 1.5 m 2 |
| Standby losses in 24 hours | 6500 BTU / 1.9 kWh | Cold/hot water connection | 1 ̋ male BSP, with adapters to both NPT on the heat exchangers, and to sweat on the 3/4" inlet/outlet |
| Dimensions | 66" H X 27" W | Shipping Weight | 420 lbs |
See more technical information in the Product Documentation section above!
