| SUW100-SW100C |
SW100C |
18.00V |
4.35A |
100.00W |
Monocrystalline |
Junction Box |
18v nominal modules are typically used in grid tie applications. If you intend to use them for a battery charging application, you need to select a MPPT style charge controller.
SunWize
SW Series Solar Modules
SunWize SW90C/SW100C modules deliver top-quality performance for all photovoltaic
applications including rural electrification, water pumping, telemetry, communications, and
general battery charging. SunWize modules can be used in single-module and multiple-module
installations and are ideal for high voltage grid-tied inverters. Each module consists
of 48 solar cells connected in series providing maximum charging power.
FEATURES:
- Single crystalline solar cells are encapsulated and bonded to the glass in multiple layers
of ethylene vinyl acetate (EVA) and laminated with a white Tedlar™ backing insuring long life
in severe environmental conditions.
- The glass surface allows maximum light transmission and is impact resistant to hailstone
forces up to 5 ft-lbs.
- A weather resistant junction box accommodates all wiring methods including moisture tight
strain relief connectors and electrical conduit.
- Pre-drilled mounting holes.
- Dual bypass diodes contained within the junction box insure reliable operation.
- Anodized aluminum tubular frames add strength and durability to the modules and are
constructed to withstand constant wind speeds of 110 mph and gusts to 133 mph.
- SW modules are manufactured to comply with U.S. and international standards, and are
UL Listed and carry a 25-year, 80% power output warranty.
|
Model |
Rated Power
(Watts) |
Rated Voltage
(Vmp) |
Rated Current
(Imp) |
Open Circuit
Voltage (Voc) |
Short Circuit
Current (Isc) |
Series Fuse Rating (Amps) |
Dimensions
(inches) |
Unit
Weight (lbs) |
|
SW90C
|
90 |
22.5 |
4.00 |
28.0 |
4.5 |
9 |
56.93 x 22.8 |
23 |
|
SW100C |
100 |
23.0 |
4.35 |
28.5 |
5.0 |
10 |
56.93 x 22.8 |
23 |
Dimensions - 56.89" X 22.80" X 1.33"
|
Junction Box
 |

Here are some tips from the altE staff
- 18v nominal modules are typically used in grid tie applications. If you intend to use them for a battery charging application, you need to select a MPPT style charge controller.
There are no reviews for this product.
Do you own this product? Write a review