BP350J 50W 12V Solar Panel

Model: 350J
Type: Silicon Nitride Polycrystalline
Power: 50 watts

The 350J photovoltaic module is designed to provide cost-effective power for DC loads with moderate energy requirements. With two sets of 36 efficiency-enhanced cells in parallel, the 350U charges 12V batteries (or multiples of 12V) efficiently in virtually any climate. Typical applications include remote telemetry, instrumentation systems, security sensors, and land-based aids to navigation. An installed diode offers flexibility, enabling two or more 350J modules to be put into series safely. The 350J is also well suited to providing subsistence power to homes in remote areas without utility (mains) service.

Mechanical Characteristics

• Dimensions Length: 839mm (33”) Width: 537mm (21.1”) Depth: 50mm (1.97”)
• Weight 6.0 kg (13.2 pounds)
• Solar Cells 72 cells (42mm x 125mm) in a 4x18 matrix connected in 2 parallel strings of 36 in series
• Junction Box U-Version junction box with 6-terminal connection block; IP 54, accepts PG 13.5, M20, ½ inch conduit, or cable fittings accepting 6-12mm diameter cable.
• Terminals accept 2.5 to 10mm2 (8 to 14 AWG) wire.
• Diodes One 9A, 45V Schottky by-pass diode included
• Construction
  • Front: High-transmission 3mm (1/8th inch) tempered glass;
  • Back: Tedlar; Encapsulant: EVA
  • Frame Clear anodized aluminum alloy type 6063T6 Universal frame; Color: silver
    1. Warranty: Power output for 25 years. Freedom from defects in materials and workmanship for 5 years. See our website or your local representative for full terms of these warranties.
    2. These data represent the performance of typical BP 350 products, and are based on measurements made in accordance with ASTM E1036 corrected to SRC (STC.)
    3. During the stabilization process that occurs during the first few months of deployment, module power may decrease by up to 3% from typical Pmax.