DPW Roof/Ground Mount SH165 4 Mods w/ TL

The POWER RAIL™ PV Module Mounting System is a top-clamping module mount designed for parallel-to-roof arrays. The POWER RAIL™ extrusion is 6061-T6 structural aluminum. The Mid-Clamps and End-Clamps are Type 304 stainless steel. Standard Mounting Feet are 5052-H32 aluminum. All hardware is stainless steel.

The Power Rail™ system is designed and warranted to withstand 125mph wind loads in an Exposure C setting when installed parallel to the roof and in accordance with our design guidelines. The maximum span between supports is 80” and the greatest allowable cantilever is 32”. For installations in areas with maximum wind speeds up to 90mph in an Exposure C setting and snow loads not greater than 30lbs/sq ft a span between supports of 96” and a maximum cantilever of 36” is allowable.

Power Rail System, Standard Mounting Foot and 6" Post

End Clamp & Mid Clamp