230/115 VAC to 24 VDC Power Supply

WATTSUN TRACKER CONTROLLER POWER SUPPLIES

We recommend that the AZ Series tracker controllers be tied to a battery bank or power supply for best performance.

The Wattsun Solar Tracker Controller operates at a nominal 24VDC. It can tap power directly from a PV array or a battery bank. In general, for system voltages other 24 VDC a small converter or power supply is necessary to provide the proper voltage to the tracker controller. Note that the small, 2-module, TR-15 can operate at 12 or 24VDC. The converters and power supplies can be purchased as an option when ordering your tracker. Please consult the table below for our recommendations. Not recommended means that the tracker is likely to be inappropriate for the application.

Features:

• Compact size: 120W - only 50mm width, 240W - only 80mm width
• Universal AC input (85 to 265V AC)
• DC input (84 to 350V DC)
• Power factor correction (EN61000-3-2)
• Meet SEMI F47 Sag Immunity
• Class 1, Div 2 Hazardous Locations
• DC ON LED indicator & DC low LED indicator
• Overcurrent protection, auto reset
• Overvoltage protection, shut down
• Adjustable output voltage (±10%)
• Screw terminal type, IP20
• Surface mount or DIN rail mount
• Additional Approvals: EMI: EN61204-3 (class B)
  EMS: EN61204-3 (industrial), UL508,
  IEC/EN60950, UL1604, TUV, UL Listing, c-UL

See the Product Documentation section above for specific details.