We are no longer offering this product.
The below information is presented for informational purposes only. You may also find similar items in the category.- FEATURED PRODUCTS
- Solar Panels
- Solar Power Systems
- Productos Solares en Puerto Rico
- Charge Controllers
- Inverters
- Deep Cycle Batteries
- Solar Panel Mounts
- MORE PRODUCTS
- Cables & Wiring
- Enclosures, Electrical & Safety
- Heat Pump Water Heaters
- Inverter Power Panels & PreWired Systems
- Meters, Communications & Site Analysis
- Portable Power Systems
- Solar Water Pumps
- Voltage Converters
- Wind Turbines
- Books & Education
- * Clearance Sale *
- Hot Deals
- Open Box & Refurb Deals
Off-Grid 580W Cabin Home Solar System 2
Item code | Model number |
KITCABIND | 580W Home Solar System |
Off Grid Cabin
580W Home Solar System
If you need help sizing a system for your off grid cabin, check out our Off Grid System Calculator
Each of these home solar systems are designed to provide you with the main components you will need to take your cabin off the grid! Since each installation is unique, some parts/materials will need to be purchased separately to satisfy the needs of your specific project and local regulations. From premium modules and racking systems, to efficient inverters and durable batteries, these home solar systems include high quality, safe components for your off grid installation.
The 580W cabin home solar system features four Kyocera 145W solar panels. Kyocera is the only module manufacturer to pass rigorous long-term testing performed by TÜV Rheinland for proven field performance. Each Kyocera module has an aesthetically pleasing black anodized frame with easily accessible grounding points on all four corners for fast installation.
580W Cabin Home Solar System Includes: | ||
Part Number | Item Description | Quantity |
KYO145SXUFU | Kyocera K145W 12V Solar Panel | 4 |
GENGNDSPLITBOLT | Solkamp Grounding Bolt #6-8 AWG | 4 |
BURLAYINLUG-1 | Tin Plated Copper Lay-In-Lug | 2 |
TWOXR100132A | Ironridge XR Rail, 11' Section | 2 |
TWOFMLFT003 | Ironridge Slotted L-Foot for XR Rails (4 Pack) - NO hardware | 2 |
TWOFF2SQUARE | Ironridge Square Bonding Hardware for L-Foot Kit (4 Pack) | 2 |
TWOUFOSTP46MMB | Ironridge UFO Stopper End Clamp Kit (4 Pack), Black | 1 |
TWOUFOCL001B | Ironridge UFO Mid Clamp Kit (4 Pack), Black | 3 |
GENSR-2HOLES-LN | 1/2" Strain Relief, 2 Round Holes/Locknut | 1 |
GENSR-1HOLE-LN | 1/2" Strain Relief, 1 Round Hole/Locknut | 1 |
MIDMNPV6 | Midnite Solar MNPV6 Combiner Box | 1 |
GENBRKDIN-15 | 15 Amp Din Rail Mount Breaker | 1 |
MIDMNSPD-115 | Midnite Solar Surge Protection Device - 115V | 1 |
OUTFW-FLEXMAX60 | Outback FlexMax 60, 60A MPPT Charge Controller | 1 |
MIDMNE250ALPLUS | Midnite Solar E-Panel for Outback inverters, 250A | 1 |
GENBRKDIN-60 | 60 Amp Din Rail Mount Breaker | 1 |
GENBRKDIN-63 | 63 Amp Din Rail Mount Breaker | 1 |
MIDMNDC-GFP | Midnite Solar 63 Amp DC Ground Fault Protection | 1 |
OUTFXR2012A | Outback FXR2012A 2000W 12V Inverter | 1 |
OUTMATE3 | Outback Mate 3Remote Monitor and Control | 1 |
OUTHUB-4 | Outback HUB-4 Communication Manager, 4 Port | 1 |
MKB8AGC2 | MK 8AGC2 AGM 6V, 190AH (20HR) Battery | 4 |
ALTBC-4/0-8B | altE Battery Interconnect Cable, 4/0 8", Black | 2 |
ALTBC-4/0-13B | altE Battery Interconnect Cable, 4/0 13", Black | 1 |
ALTBC-4/0-13R | altE Battery Interconnect Cable, 4/0 13", Red | 1 |
ALTBC-2/0-120RB | altE Battery to Inverter Cables, 2/0 10', Pair | 1 |
DC to AC Inverter/Charger
The OutBack FX series is a pure sine wave inverter/charger that can be used for both small and large power systems. Each OutBack FX inverter/charger is a complete power conversion system - DC to AC inverter, battery charger and AC transfer switch. The OutBack FX is designed to survive harsh environments anywhere in the world. The unique sealed, gasketed die-cast aluminum chassis protects and keeps the power conversion components cool - without requiring outside air to be blown through the sensitive electronics. This reduces the major causes of inverter failure - corrosion, dust, insect and animal damage. The FX can be used in high ambient applications up to 60°C with reduced output ratings. The FX2010T includes the "Turbo" option which consists of an external cooling fan and baffles to enhance operation in hot conditions.
Solar Charge Controller
The FLEXmax 60 is the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers from OutBack Power Systems. The FLEXmax 60's innovative MPPT algorithm is both continuous and active, increasing your renewable energy yield up to 30%. Thanks to enhanced cooling, the FLEXmax 60 can operate at its full 60 amp maximum current rating in ambient temperatures as high as 104°F (40°C), making it one of the must durable and well known controller options on the market. Each FlexMax controller features a backlit display and enhanced network communications, which allow the FLEXmax 60 to be remotely programmed via the optional MATE system display and controller. (included in this package)
Batteries
Deka Solar batteries are engineered and tested to provide reliable, long-lasting back-up power for PV and renewable energy applications where the batteries will be charged/discharged on a daily basis. These sealed AGM (Absorbed Glass Mat) batteries are spill proof and 100% maintenance free.
This home solar system includes (4) 6V, 190Ah batteries, which will be wired together for a 12V, 380Ah battery bank. Deep cycle batteries should not be discharged lower than 50%, so a battery bank of this size will provide approximately 925 Watt hours (Wh) of energy per day, for two days when fully charged. This is a rough estimate of capacity, actual capacity can change based on temperature, state of charge and the condition of the batteries. Additional batteries can be added to this system (either 4 or 8) to increase the capacity of the battery bank.
Recommended System Add-Ons | |
Part Number | Item Description |
OUTRTS-BTS | Outback Remote Temperature Sensor w/ 20' Cable |
MKB8AGC2 | MK 8AGC2 AGM 6V, 190AH (20HR) Battery |
ALTBC-4/0-8B | altE Battery Interconnect Cable, 4/0 8", Black |
ALTBC-4/0-36B | altE Battery Interconnect Cable, 4/0 36", Black |
ALTBC-4/0-36R | altE Battery Interconnect Cable, 4/0 36", Red |
Our home solar systems include the basics that you'll need for your solar installation. In this table, we've listed a few more items that you may want to include with your system order. If you are interested in remote displays, mounting standoffs, or additional batteries and cables, this is the place to find them.
* To take a look at technical spec pages, installation manuals, warranty information, etc. click on the 'Documents' tab towards the top of this page
- IronRidge_Standard_Rail_Design_Manual.pdf
- Ironridge_Roof_Mounts_DataSheet.pdf
- Outback_Flexmax_60&80_Manual.pdf
- Outback_Flexmax_60&80_specs.pdf
- Outback_FX&VFX_Inverter-Charger_Installation.pdf
- Deka_8AGC2_spec_sheet.pdf
- MK_AGM_Warranty.doc
- Outback_FX-VFX_Inverter-Charger_Installation.pdf
- Kyocera_KD_Series_Warranty.pdf
- Kyocera_KD140-GX-LFBS_spec.pdf
This item is a package made up of the following components. Please call to speak to a sales representative to learn about other options which may be available.
- 4 x Kyocera KD145SX-UFU 145 Watt Solar Panel
- 4 x Tyco Electronics Solklamp Grounding bolt 6-12 AWG Solid
- 2 x Burndy Tin Plated Copper Lay-in Lug, Qty 1
- 2 x Ironridge XR-100 Rail, 11 Foot Section, Clear
- 2 x Clear (Mill) IronRidge Slotted L Foot Kit, 4pk -No Hardware
- 2 x Bonding Hardware, Square, for FlashFoot 2 and L Foot, 4pack
- 3 x IronRidge Universal Fastening Object (UFO), Black 4pk
- 1 x IronRidge XR Stopper Sleeve, 46MM, Black, EACH
- 1 x 1/2 Inch 2 Hole Strain Relief with Lock Nut
- 1 x 1/2 Inch Single Hole Strain Relief with Lock Nut
- 1 x Midnite Solar MNPV6 Combiner Box
- 1 x 15 Amp 150VDC Din Rail Mount Breaker
- 1 x Midnite Solar Solar Surge Protection Device - 115V
- 1 x Outback Flexmax 60 MPPT Solar Charge Controller
- 1 x Midnite Solar E-Panel PLUS, White Steel 250A for OutBack Inverters
- 1 x 60 Amp 150VDC Din Rail Mount Breaker
- 1 x 63 Amp 150VDC Din Rail Mount Breaker
- 1 x MNDC-GFP 63 Amp DC Ground Fault Protector
- 1 x Outback Power FXR2012A 2000 Watt 12 VDC Sealed Inverter/Charger
- 1 x Outback Power MATE3s System Display and Controller
- 1 x Outback Hub-4 Communication Manager, 4 Port
- 4 x MK 8AGC2 AGM 190Ah (20 Hr) T881 Terminal
- 2 x Battery Interconnect Cable, 4/0 AWG 8", Black
- 1 x Battery Interconnect Cable, 4/0 AWG 13", Black
- 1 x Battery Interconnect Cable, 4/0 AWG 13", Red
- 1 x Battery to Inverter Cables, 4/0 AWG 10Ft (120"), Red/Black Pair