Single Battery Bank Monitor
Provides Battery Status Information At-A-Glance
Formerly known as the "E-Meter", the Link 10 uses sophisticated microprocessor technology to provide complete battery status information for one battery bank. Simple and easy-to-use multicolour display show volts, amps hours consumed, and operating time remaining. The Link 10 and Link 20 allow you to select Automatic, Sleep and Scanning modes an automatically calculate and display charging efficiency. By adding an optional prescaler (either the 0 to 100 volt model or the 0 to 500 volt model), Link 10 can monitor single battery banks up to 500 volts.
User Interface with Graphic and Digital Displays
Link 10's splash-proof front panel allows for hands free operation
and performs over 50 different functions. Major functions include:
Programmable Advanced Functions
- Digital Numeric Display - LED display shows numeric read out of volts, amps, amp-hours and time remaining
- Easy to read multi-color LED bar graph
- Splash proof panels allow for outdoor mounting and hands free operation
- Displays key historical battery information such as charge efficiency, deepest discharge, and average discharge
- Compatible with 12 and 24 volt DC systems
- Works with any battery type
- Includes DC shunt (part#84-2010-00)
- Low battery alarm contacts
- One year warranty
Customize Link 10 to perform specialized functions
such as setting Alternative Energy, Sleep and Kilowatt Hour display
Link's patented ratchet ring mounting hardware
makes installation easy and fast. The gasket around Link 10 ensures
a rattle-free installation. Complete installation instructions come
with each Link10 including instructions for high voltage systems found
in electric vehicles.
Historical Data Display
Link 10 displays key historical battery information
such as charge efficiency, deepest discharge, and average discharge.
Front Panel Software
Lock Link 10's Front Panel Software Lock prevents
other users from changing set up parameters.
Precision Shunt (included)
Each Link 10 comes with a precision shunt. The
shunt is a one hundred micro ohm resistor. Link 10 senses very small
voltage measurements across the shunt one thousand times per second
in order to calculate average current. Heavy-duty shunts are available
for currents that exceed 500 Amps.
|Standard Model Auto Range
||9.5-50 VDC (0.1V resolution)
||0-100 & 0-500 VDC
||+/- 0-40 Amps (0.1 Amp resolution)
||+/- 500 Amps (1 Amp resolution)
||+/- 0-199.9 Amp Hours (0.1 Ah resolution)
||+/- 200-1,999 Amp Hours (1 Ah resolution)
|Time Remaining Measurement
||0 to 199.9 Hours (0.1 hour resolution)
||0 to 255 Hours (1 hour resolution)
|DC Power Supply Voltage
||20-225 mA (display dims with ambient light
input voltage and sleep mode)
||500 Amp / 50 mV (included)
||+/- 0.6% of reading + 1 least count of resolution
||+/- 0.8% of reading + 1 least count of resolution
|Outer Bezel Diameter
||(face) 2.5 inches (63.5mm)
||1.95 inches (50mm)
||3.15 inches (80mm)
|Hole Cut Size
||2 1/6 inch diameter (52mm)
||4.3 oz / 122 g - without shunt
- Color-coded, twisted pair cable eases installation.
Available in twenty five or fifty foot lengths (25 or 50 ft.).
- Prescalers (0-100 volts or 1-500 volts) are available to extend voltage
range covered by your meter. If input voltage is greater than 24 volts, you will need a prescaler.
There are no reviews for this product.
Do you own this product? Write a review