Xantrex Link 10 Prescaler 0-100V for Link 10

PreScaler for Xantrex Link 10 for 48 volt systems (100v max). 48v nominal battery banks require a prescaler for the Link 10 to properly measure voltage.

This Prescaler is required for the Xantrex Link 10 if you are measuring voltages over 50v and less than 100v. Use the correct model of prescaler (100 V or 500 V) for the battery bank. If the voltage is less than 100V do not use a 500V prescaler. Link 10 will make certain assumptions about the batteries based on the model of prescaler. Certain functions may not be programmed properly if using a 500V prescaler on a system less than 100 V.