SHOP ALL PRODUCTS

V

We are no longer offering the Xantrex 4000W SWPLUS4048 48VDC XFER Inverter

The below information is presented for informational purposes only. You may also find similar items in the category.

Xantrex 4000W SWPLUS4048 48VDC XFER Inverter

Xantrex 4000W SWPLUS4048 48VDC XFER Inverter
Xantrex 4000W SWPLUS4048 48VDC XFER Inverter
Item code Model number Volts Watts
XANSWPLUS4048 SWPLUS4048 48V 4000W
Near Pure Sinewave

Xantrex
SW Plus 2524, 2548, 4024, 4048, & 5548
SW Plus 2500, 4000 and 5500 Inverter/Charger Series

Xantrex/Trace Electronic Equipment
SW Plus Inverter/Charger Series

Power Independence in a Powerful Package

Designed to provide homes with a completely independent power supply, the SW Plus 2500, 4000 and 5500 Inverter/Charger Series combine an inverter, battery charger and dual transfer switch in one package.

Available in 24- and 48-volt versions, the SW Plus Series offers continuous power output of 2.5, 4.0 and 5.5 kVA. The SW Plus provides AC power for household appliances and DC power to charge batteries. As part of an off-grid renewable power system, it converts all forms of renewable energy into utility grade household power.

The SW Plus can also be used as part of a backup power system to automatically provide AC power when utility power fails. For supplementary power, the inverter/charger can be combined with the optional Generator Start Module (GSM) to automatically start and stop a generator, based on user needs. To save on utility bills, the SW Plus can also be programmed to switch to battery power from utility power during peak-rate periods.

Product Features

  • 2.5, 4.0 and 5.5 kVA continuous output of sine wave power (to 40º C)
  • Huge surge (inrush current) capacity – up to four times rated output for starting large loads
  • High capacity, multi-function battery charger provides accurate four stage re-charging and maintenance
  • Smart Energy Management system controls utility and/or generator usage
  • Non-volatile memory provides the SW Plus with the ability to save customized settings
  • FCC Part B compliant means less potential interference with radio and telephone equipment
  • Inverter Control Module (ICM built-in to SW Plus) Energy efficient with 95% peak efficiency and <20 watts of idle current (<2 watt in search mode)

Options

  • Expandable – two SW Plus inverters may be stacked for increased output in 120/240 VAC Matching AC and DC conduit boxes for code compliant installation
  • Generator Start Module used to control either two and three wire start generators
  • Auxiliary Load Module used to automatically start and stop auxiliary DC loads such as fans based on programmable voltage parameters
  • Inverter Communications Adapter allows for remote connection to SW Plus via PC
  • An additional Inverter Control Module (ICM built-in to SW Plus) may be installed for remote operation and monitoring of inverter/charger

 

Electrical Specifications

SW Plus 2524

SW Plus 2548

 SW Plus 4024 SW Plus 4048 SW Plus 5548
AC Input Voltage (nominal) 120 VAC 120 VAC 120 VAC 120 VAC 120 VAC
AC Input Voltage Range, adjustable 80-150 VAC 80-150 VAC 80-150 VAC 80-150 VAC 80-150 VAC
AC Input Current
(60 amps AC pass through) 		20 amps charging 20 amps charging 30 amps charging 30 amps charging 45 amps charging
Continuous Power @ 40°C 2.5kW 2.5kW 4.0kW 4.0kW 5.5kW
Efficiency (peak in Inverter mode) 95% 95% 95% 95% 96%
Inverter Voltage Regulation +/- 3% +/- 3% +/- 3% +/- 3% +/- 3%
Frequency (Nominal +/- 0.04% crystal controlled ) Inverter mode 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz
Continuous Output Current  @ 25°C 21 A rms 21 A rms 33 A rms 33 A rms 46 A rms
Current Surge Capability  @ 25°C: 5 sec rating 80 A rms 80 A rms 85 A rms 95 A rms 105 A rms
Over current trip point 125 A peak 175 A peak 125 A peak 175 A peak 175 A peak
Inverter Voltage THD (Resistive load) < 5% < 5% < 5% < 5% < 5%
Automatic Transfer Relay 60 A rms 60 A rms 60 A rms 60 A rms 60 A rms
DC Input Voltage (Nominal) 25.2 VDC 50.4 VDC 25.2 VDC 50.4 VDC 50.4 VDC
DC Input Voltage Range 22-32 VDC 44-64 VDC 22-32 VDC 44-64 VDC 44-64 VDC
DC Current at Rated Power (Inverter mode), internal temperature stabilized 120 amps DC 60 amps DC 190 amps DC 95 amps DC 135 amps DC
Idle Consumption (Typical at full voltage) < 16 watts < 20 watts < 16 watts < 20 watts < 20 watts
Search Mode Consumption (Typical at full voltage) < 2 watts < 2 watts < 2 watts < 2 watts < 2 watts
Continuous Charge Rate @ 120 VAC input (See Note 1 below) 70 amps DC 40 amps DC 110 amps DC 60 amps DC 75 amps DC

Mechanical Specifications
Operating Temperature Range:  
Unit will meet specifications
32°F - 77°F (0°C - 25°C)
Unit may not meet specifications
-13°F - 140°F (-25°C - 60°C)
Storage
-67°F - 284°F (-55°C - 140°C)
Enclosure Type
Indoor, ventilated, Galvaneel chassis with powdercoat finish
Unit Weight 105 lb (48 kg) 105 lb (48 kg) 113 lb (51 kg) 113 lb (51 kg) 136 lb (62 kg)
Shipping Weight 111 lb (50 kg) 111 lb (50 kg) 120 lb (54 kg) 120 lb (54 kg) 143 lb (65 kg)
Inverter Dimensions (H x W x D)
15 x 22.5 x 9" (38 x 57 x 23 cm)
Shipping Dimensions (H x W x D)
20 x 27 x 15" (52 x 69 x 40 cm)
Mounting
Wall mount/Shelf

Features
Forced Air Cooling
Standard variable speed brushless DC fans
Multi-stage charging
Bulk, absorption, float/silent, and equalize
Control Panel
Standard built-in, two line, backlit, alphanumeric LCD with 8 LED indicators
Battery Temperature Sensor (BTS)
BTS - standard remote battery temperature sensor for increased battery performance

Options
Generator Start Module (GSM)
Automatic generator control system for two and three wire start AC and DC generators
Auxiliary Load Module (ALM)
User adjustable voltage controlled signal relays for control of loads or charging sources
Remote Inverter Control Module (ICM)
Optional full function remote control with LCD and LED indicators
RC8
Optional remote on/off with indicator
Stacking Interface (SWI)
Optional cable for series of stacking of two identical SW Plus units for 120/240 VAC output
DC Conduit Box (DCCB)
Optional side mount conduit box for code-compliant DC wiring connections (USA)
DC Conduit Box Fused (DCCB-F)
Optional side mount conduit box for code-compliant DC wiring connections with fuse (Canada)
AC Conduit Box (ACCB)
Optional side mount conduit box for code-compliant AC wiring (bypass/disconnect circuit breakers)

Common Specifications
Waveform
Sine wave, 34 to 52 steps per cycle
Load Sensing (Inverter Mode)
Adjustable 8 to 248 watts (8 watts default)
Listings
CSA listed to UL 1741 and CSA107.1 FCC Class B

 

Xantrex/Trace Electronic Equipment


There are no reviews for this product.

Do you own this product? Write a review

Click here for BBB Business Review

McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

Share

Click on an icon to share! If you don't see the method you want, hover over the orange "+".

Feedback

What can we do to help you?

Please enter a summary
Submit +