877-878-4060

We are no longer offering this product.

The below information is presented for informational purposes only. You may also find similar items in the category.
SHOP ALL PRODUCTS
V

Magnum Energy MSH4024RE 4000W 24V Inverter/Charger

Magnum Energy MSH4024RE 4000W 24V Inverter/Charger
Magnum Energy MSH4024RE 4000W 24V Inverter/Charger

All Magnum inverters are on EXTREME backorder until further notice.

 
Item code Brand name Model number Volts Watts Waveform
MAGMSH4024RE MAGNUM Energy, Inc MSH4024RE 24V 4000W Pure
Magnum Energy
MSH Series Inverter
Magnum Logo


The MSH Series Inverter/Charger from Magnum Energy is a new pure sine wave hybrid inverter that combines the tried and tested engineering of Magnum's MS technology to make it an optimal choice for your mobile, renewable and back-up power needs. The MSH Series is powerful, easy-to-use, and best of all, cost effective. There are two lines available in MSH hybrid version - renewable energy (RE) and mobile. The mobile series has one 60A AC input, whereas the renewable energy version has two 60A AC input - one for the grid and the other for the generator. The new MSH-M pure sinewave mobile models add a "Load Support" feature. Load Support allows incoming AC to synchronize with the inverter's output and uses additional power from the batteries to power loads. Two mobile models are available - a 3000W and a 4000W. These have have neutral ground switching and are intended to be used for land vehicles (RVs or trucks) or marine craft. The Renewable Energy (RE) model is intended to be used for residential or commercial applications.

The MSH Series is ETL listed to the stringent requirements of UL/cUL 458 for mobile use and UL/cUL 1741 for renewable energy use.

Features

Hybrid technology - Most inverters only use one source of energy to power loads, either from incoming AC power utility or AC generator or from the batteries. The MSH series combines the energy from both sources to power loads. This allows the inverter to recharge the batteries when there is surplus power or deliver more power to the loads if they require more than the AC input can supply itself.

Load support - Load support parallels the inverter output with incoming AC source allowing it to run larger loads from smaller generators.

The MSH Series Inverter/Charger is loaded with features:
Pure sine wave: Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
Versatile mounting: Mount the MSH Series on a shelf, bulkhead, or even upside down.
Interchangeable: The MSH series is interchangeable with Magnum MS Series and use the same accessories as the MS series.
Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
Multiple ports: The MSH Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.
Convenient switches: The MSH Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
Buy with ease: The MS Series is backed by a three-year (36-month) limited warranty.

Accessories and Options
Remote control For convenient finger-tip operation, including the new one-knob™ programming, available in standard and advanced versions.
Automatic Generator Startup: Automatically starts and stops your generator based on temperature or battery voltage, available in standalone and network versions.
Magweb Wireless Monitoring: The Magweb wirelessly communicates with Magnum Energy's inverters and accessory including the inverter, automatic generator start, and battery monitor. your generator based on temperature or battery voltage.

Specifications

Model
MSH4024RE
MSH3012M*
MSH4024M*
Inverter Specifications
Input Battery Voltage
18 - 34 VDC
9 - 17 VDC
18 - 34 VDC
Nominal AC output voltage
120 VAC
120 VAC
120 VAC
Output frequency and accuracy
60Hz ± .05 Hz
60Hz ± 0.05 Hz
60Hz ± 0.1 Hz
Total Harmonic Distortion (THD)
< 5%
< 5%
< 5%
1 msec surge current (amps AC)
120
70
120
100 msec surge current (amps AC)
82
40
82
5 sec surge power (real watts)
5800
3900
5800
30 sec surge power (real watts)
5400
3800
5400
5 min surge power (real watts)
4900
3200
4900
30 min surge power (real watts)
4500
3000
4500
Continuous power output at 25ºC
4000 VA
3000 VA
4500 VA
Rated input battery current
267 ADC
400 ADC
267 ADC
Inverter efficiency
93.7%
90.0%
93.7%
Transfer time
16 msecs
16 msecs
16 msecs
Search Mode
< 7 watts
< 8 watts
< 8 watts
No Load (120 VAC output with remote)
25 watts
30 watts
25 watts
Waveform
Pure Sine Wave
Pure Sine Wave
Pure Sine Wave
Charger Specifications
Continuous Output at at 25 ºC
110 ADC
125 ADC
110 ADC
Charger efficiency
85%
87%
87%
Power factor
> 0.95
> 0.95
> 0.95
Input current at rated output (AC amps)
29
18
29
General Features and Capabilities
Transfer relay capability
60A AC
Five stage charging capability
Bulk, Absorb, Float, Equalize, and Battery Saver
Battery temperature compensation
With available temp sensor (battery temp 0 - 50 ºC)
Remote inverter on/off switch
With available pigtail to connect to dry contact
Internal cooling
0 to 120 cfm variable speed drive using dual 92mm brushless DC fans
Overcurrent protection
Yes, with two overlapping circuits
Overtemperature protection
Yes on transformer, MOSFETS, and battery
Conformal coating on PCB's for corrosion protection
Yes
Powder coated chassis & top for corrosion protection
Yes
Stainless steel fasteners for corrosion protection
Yes
Dual AC branch rated output breakers
No
Listings
ETL Listed to UL/cUL 458, UL 1741, CSA C22.2 #107.1-01, meets KKK-A-1822E standard
Warranty
Three years parts and labor
Environmental Specifications
Operating temperature
-20 ºC to + 60 ºC (-4 ºF to 140 ºF)
Nonoperating Temperature
-40 ºC to + 70 ºC (-40 ºF to 158 ºF)
Operating Humidity
0 to 95% RH non-condensing
Physical Specifications
Dimensions (l x w x h)
13.75" x 12.65" x 8.0" (34.9 cm x 32.1 cm x 20.3 cm)
Mounting
Shelf (top or bottom up) or bulkhead (vents up)
Weight
58 lb (26.3 kg)
55 lb (24.9 kg)
55 lb (24.9 kg)
Max operating altitude
15,000' (4570 m)

*M-Series is for use in mobile applications

 

Magnum Logo


Click here for BBB Business Review ASE NESEA Member
Paypal Visa MasterCard Amex Discover
McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams