Outback AXS Modbus/TCP Interface Device- Port

Outback Power Systems
AXS Port
Modbus/TCP Interface

Please Note: This product is for use instead of a system display such as the MATE3. OutBack does not support the use of the AXS Port and a system display at the same time.

Targeting industrial and commercial customers, the SunSpec compliant AXS Port Modbus/TCP Interface provides advanced connectivity with OutBack FLEXmax™ charge controllers as well as other OutBack devices, enabling remote system status monitoring, command and control. With the AXS Port Interface, users can securely access an OutBack power system anywhere in the world via an Ethernet connection using Modbus Transmission Control Protocol (TCP), and communicate directly to a single device, or to multiple devices using OutBack’s HUB4 or HUB10 communications management components.

Features

• Monitor, Command and Remotely-Control selected Outback system components
• Manages over two years of datalogging
• Firmware revision of the AXS Port can be updated directly using a microSD card, or it can be updated using an FTP site and the microSD card
• The AXS Port can send email messages with alarms or other status reports

Accessories

• The AXS Port can use a Type 2 microSD card for logging operational status information about the system. A 2 GB microSD card is included. The SD card is also required for performing firmware updates.
• Mounting clip included for din rail mounting
• Can be equipped with an additional temperature sensor (Outback Remote Temp Sensor - RTS) to supplement the battery sensor used by other OutBack devices. Ambient temperature of a room, PV array, etc. can be sent as additional status information.