877-878-4060

We are no longer offering this product.

The below information is presented for informational purposes only. You may also find similar items in the category.
SHOP ALL PRODUCTS
V

MidNite Solar Pre-Wired AC Coupled System with Enclosure, MS4024PAE

MidNite Solar Pre-Wired AC Coupled System with Enclosure, MS4024PAE
MidNite Solar Pre-Wired AC Coupled System with Enclosure, MS4024PAE
 
Item code Brand name Model number Volts Watts
MIDMND3RACCPLME Midnite Solar, Inc. MND3RACCPLM 24V 4000W

Interested in learning more about AC coupling? Check out the Alt-E Store blog post about it!


Midnite Solar Logo Midnite PreWired AC Coupled System

Midnite Solar
Pre-Wired System
AC Coupled, Magnum MS4024PAE
in a D3R Battery Enclosure
MND3RACCPLME

Capable of 4,000 watts of grid tie input when installed with an existing grid tie system and sealed battery bank (gel or agm).

NOTE: Batteries are NOT included (just for illustrative purposes in image)

The MidNite AC coupled system includes a Magnum 120/240VAC, 24VDC 4,000 watt Inverter, prewired for 4,000 watts of grid tie input a MidNite D3R battery box Capable of AC coupled system using our D3R battery box with the Magnum MS4024PAE inverter. Initially designed around the Concorde PVX3050T 6 volt batteries, this system can be used with any comparable sealed battery option for the battery bank. The MND3RACCPLME is a complete, ready to use (Less Batteries) AC coupled system. The AC coupled system will give you battery backup when the utility is down and also allow the existing grid tie system to charge the batteries and run loads. ETL Listed for the US and Canada.

How does an AC Coupled system work?

An AC coupled system will sell the PV power to the grid under normal conditions. When there is a power outage the battery based inverter will open its relay and disconnect from the grid. It will produce AC power for the critical loads at this time. The grid tie inverter will connect to the battery based inverter to run the loads and charge the batteries from the Solar Panels. When the batteries get full there is a relay inside the AC coupled battery based inverter system that disconnects the grid tie inverter to prevent the batteries from being over charged. Check out the diagram below for one possible system setup.

Midnite PreWired AC Coupled System

Click here for BBB Business Review ASE NESEA Member
Paypal Visa MasterCard Amex Discover
McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams