DC Relay, 12VDC Input, up to 100VDC, 40A Load

DC High Power Relay

This high power relay can be used for load diversion control when connected to the low power 12V DC relays of inverters and charge controllers (e.g. Outback FX inverters, MX60 and others). What makes this unique is that it uses a 12V DC input (supports up to 32V max) and the contacts will support a battery bank up to 100V DC max at 40A DC. This is a less expensive load diversion option than buying a load diversion contoller if you already have an inverter or charge controller with a built-in control relay.

With a 48V system, this relay can be used with diversion loads of up to 1800W reliably. With a 24V system, you can use loads up to 900W, and a 12V system can be used with loads up to 450W.

Note: Not recommend for loads which have high inductance (coil), as it will produce harmful transient voltages. If you choose to do so, you must use a fast recovery type of diode in parallel with the load with a PIV rated greater than the supply (battery bank's) voltage.

This relay can also be used in conjunction with an Outback MX60 or or Apollo T80 charge controller to turn on a Zephyr battery vent fan.

Please see the manual in the Product Documentation section for more information.