The XW Power Distribution Panel with conduit box is factory-wired and labeled to support a code-compliant single-inverter installation. The XW PDP can be configured to mount on either side of the inverter/charger. Internal wiring and breakers can be added to expand the XW System with up to three inverters, four charge controllers, or other equipment to support larger systems, including three-phase.
Designed with consultation and input from industry experts, dealers, and installers, the XW sets
a new standard for battery-based inverter/chargers. Integrating the best features available in the
market, innovative new features by Xantrex and balance-of-systems components, the XW Hybrid
Inverter/Charger’s design makes installation quicker and easier. The XW offers high efficiency and
unprecedented surge capacity to maximize the owner’s return on investment. No other inverter/charger looks or performs like the XW.
Features
- Accommodates both AC and DC breakers and wiring for three XW Hybrid Inverter/Chargers and four XW Solar Charge Controllers
- Includes breakers and wiring to connect to XW Hybrid Inverter/Charger
- Wiring is labeled and cut-to-length, ready to connect to inverter
- Uses flexible Arctic Ultraflex Blue™ wires
- Multiple knockouts on sides, top, bottom and back of unit
- Includes mounting back plate and and XW Conduit Box
Product Compatibility
The distribution panel and conduit box interface with the following products:
- XW Connection Kit (for second XW Hybrid Inverter/Charger) and XW Conduit Box
- XW4024, XW4548, and XW6048 Inverter/Chargers
- XW Solar Charge Controllers (requires customer-supplied breakers and wiring)
- C-Series Charge Controllers (requires customer-supplied breakers and wiring)
Dimensions
- XW PDP dimensions (H x W x D): 30 x 16 x 8.25” (761 x 406 x 210 mm)
- Shipping dimensions (H x W x D): 48 x 21 x 13.5” (1220 x 533 x 343 mm)
- Shipping weight: 67.2 lb (30.5 kg)
XW PDP ships with:
Power Distribution Panel enclosure with a field-reversible panel door, pre-wired with:
- Three 60 A, 120/240 Vac, two-pole, Square-D, Type QOU, DIN-rail mounted AC breakers for
AC input, Bypass, and AC Load
- One GJ250A 160 Vdc, 3/8” stud DC breaker
- One ground terminal bus bar
- One neutral terminal bus bar
- One battery negative terminal bus bar
- One pair #4/0 AWG Arctic Ultraflex Blue™ Battery Cables (factory installed and labeled,
ready to connect)
- #6 AWG Arctic Ultraflex Blue™ AC wiring (factory installed and labeled, ready to connect)
- Room to expand - Five additional AC breaker positions for two-pole, 60 A Square D, Type QOU
breakers; 10 additional DC breaker positions (eight for charge controller breakers and two
for large GJ inverter breakers)
- Mounting Plate
- XW Conduit Box
Click here to go to the Xantrex XW Sizing Tool (you will leave this page). |