Outback Pspv Combiner Box (No Brkrs or Fs Hldrs)

This product is no longer available.

The below information is presented for informational purposes only. You may also find similar items in the category.
Outback Pspv Combiner Box (No Brkrs or Fs Hldrs)
Need help selecting components and designing your system?
Give our Knowledgeable Sales Folks a call at 877-878-4060.

Basic Stats click to view hide

Our Code: OUTPSPV

Reviews click to view hide

If you own this product write a review!

Combiner Box by Eugene Stepanik
Rating:

We liked the modular construction of the combiner box which lends itself to exacting configurations Continue...

Product Documentation click to view hide

Details click to view hide

Read about how this product was used in Safe With Solar: Brent Cash Chooses Renewable Energy to Secure His Family, a real-life story from one of our customers!

OutBack Power Systems
PSPV
PV Array Combiner Box

PSPV PV Array Combiner Box

OutBack Power Systems now offers a PV array combiner which can be used with a wide variety of PV system designs and module configurations. Can be configured with DC breakers for low voltage systems (under 150 VDC) or touch safe type fuse holders for high voltage systems (up to 600 VDC).
The PSPV is designed to provide NEC code compliant overcurrent protection and interconnection of multiple PV panels or subarrays into one or more PV arrays for connection to charge controllers or inverter systems. The PSPV is easily field configured to match your PV system design and ampacity requirements.

Standard Features and Components

  • Outdoor, rainproof powdercoated aluminum enclosure - can be installed on vertical or sloped surfaces or pole mounted
  • Snap in DIN rail mounting spaces for up to twelve 125 VDC rated OutBack PV breakers. PV Breakers are hydraulic-magnetic type and are not affected by high ambient temperatures. 2 year warranty on the PV breakers. For 12, 24, 48 and 60 VDC systems with PV array open circuit voltages up to 150 VDC. Load break rated.
  • Also available with touch safe type midget fuse holders for high voltage systems up to 600 VDC
  • Dual positive breaker combiner busbars - can be installed to provide one or two seperate PV output circuits
  • PV negative terminal bus bar with mounting holes for an additional TBB
  • #1/0 AWG set-screw compression type box lug terminals for output wiring - accepts bare cable
  • Four ¾ and 1 inch conduit knockouts - one on the bottom, back and each side - enough space provided on bottom and back to allow up to a 2 inch conduit punch for larger cabling. Side knockouts can be punched out to 1 1/4” inches.
  • Eight ½ inch knockouts on bottom for PV module or sub array input conduits or strain reliefs
  • #1/0 AWG ground lug - can be mounted either on the inside or outside surface
  • For negative or positive ground PV systems

Optional Components (Click Part Number for Detailed Description)

Part Number Description
OBPV-2 2 amp DC circuit breaker, 125 VDC max open circuit with #2 AWG terminals
OBPV-4 4 amp DC circuit breaker, 125 VDC max open circuit with #2 AWG terminals
OBPV-6 6 amp DC circuit breaker, 125 VDC max open circuit with #2 AWG terminals
OBPV-8 8 amp DC circuit breaker, 125 VDC max open circuit with #2 AWG terminals
OBPV-9 9 amp DC circuit breaker, 125 VDC max open circuit with #2 AWG terminals
OBPV-10 10 amp DC circuit breaker, 125 VDC max open circuit with #2 AWG terminals
OBPV-15 15 amp DC circuit breaker, 125 VDC max open circuit with #2 AWG terminals
OBPV-20 20 amp DC circuit breaker, 125 VDC max open circuit with #2 AWG terminals
OBPV-30 30 amp DC circuit breaker, 125 VDC max open circuit with #2 AWG terminals
OBF-6 6 amp DC Fuse, 600 VDC max open circuit
OBF-10 10 amp DC Fuse, 600 VDC max open circuit
OBF-15 15 amp DC Fuse, 600 VDC max open circuit
OBFH Fuse Holder
TBB Insulated terminal bus bar for adding a second isolated negative circuit (required when using with two RV Power Products Solar Boost MPPT controller)

 

Physical Dimensions

  • PSPV enclosure: 9.2" wide x 3.5" deep x 13.1" tall (23.1cm x 8.7cm x 33.2cm)
  • Shipping size: 10" x 4" x 14"
  • Shipping Weight: 6 pounds (2.7 kG) + options

Send to a friend Write a review Request more info
HACKER SAFE certified sites prevent over 99.9% of hacker crime. BizRate Customer Certified (GOLD) Site
Call us for solar panel system design help.
877-878-4060

Se habla Español
LiveZilla Live Help
 

browse by brand

 
 
Why buy from us? Sign up for our Newsletters Save / Earn Money Have a suggestion? Found a bug?

Customer testimonials

“My experience was great as is I ordered late Friday and received my order Tuesday which to me is out standing.”

Fred - Homestead, FL

“Thank you for such a quick response and for trying to be competitive on the price. Great customer service is more important to me than rock bottom prices. Thank you!”

Joey - Mountain View, Arkansas

more testimonials ...