Battery Desulphator and Trickle Charger BD-10

Battery Desulphator and Trickle Charger BD-10
List Price: $149.60
Our Price: $149.06
Model: BD-10
Brand: Solar Converters
Availability: In Stock
Quantity

Estimate Shipping.

Need help selecting components and designing your system?
Give our Knowledgeable Sales Folks a call at 877-878-4060.

Basic Stats click to view hide

Volts: 12 V
Amps: 2 A
Our Code: SORBD-10

Alt-E Tips click to view hide

Q. Does it need to be used in conjunction with a battery charger or can it be run off of the battery itself?
A. This desulphator runs off of the battery directly (creating a weak alternating current signal across the batteries - shaking the sulfate crystals loose off of the lead plates). However, to use the desulphator optimally, it should be connected both when charging and discharging the batteries.

Reviews click to view hide

There are currently no reviews. If you own this product write a review!

Product Documentation click to view hide

Details click to view hide


Solar Converters Inc Solar Converters Inc.
Battery Desulphator and
Trickle Charger BD-10

Base Model: BD-2

Application

When batteries age and/or spend too much time in a discharged or abused state, sulphite crystals can form on the battery plates which inpede the flow of electricity and is the main cause of poor battery performance. This unit is a basic battery desulphator with advanced control techiques married with a 3 amp MPPT charge controller. Its primary function is to be used as a trickle charger/desulphator to keep a battery that is in storage, say an RV battery over the winter, in fully charged state and ready to go, or to recover badly sulphated battery to near new condition. This unit emphasizes extremely low cost and premium performance.

Basic Operation

This unit is a 3 amp charge controller married with a battery desulphator. It is used to recover a a badly sulphated battery or to maintain a battery in storage for a significant time.

Charge Controller Section:

The charge Controller is a 12 V @3 amp nominal MPPT that can take as an input a 30 W solar panel or a 20 - 40 VA 16 V Class 2 transfomer (Doorbell transformer) and charge control a 12 V nominal Lead acid Battery. It includes battery fusing. Its output is pure DC and it will maintain a charge on the battery.

Desulphator section:

Sulphite crystals form when the battery charge is reduced and/or the discharge/ discharge cycles are not well suited for the battery. These sulphite crystals act as insulators to the flow of electricity in the battery, seriously degrading the capability of the battery to have electricity flow in it, reducing its charging and discharge capability.

Like most battery desulphators, this unit uses a sharp pulse of current forced into the battery suddenly to "jar" the sulphite crystals and cause internal resonances, both mechanical and electrical, to grind down the sulphite crystals that form so they can be re-combined into the battery acid.

With the high quality charge controller, this unit can desulphate and recover a very dead battery. In our testing it has recovered a number of car type batteries left in landfill for over 3 years. Note: It will not recover batteries that have other ailments to then, ex shorted cells, lack of acid etc.

Features

  • 12 V nominal systems and 24 V Model is available
  • Operates from a 30 W Solar Panel or a 16 V 20 - 40 VA Class 2 (doorbell) transformer for AC power
  • 10 amp pulse harmonic shaped pulse
  • LED to indicate unit operating
  • EXTREMELY low draw

Electrical Specifications

Base Model: BD-2

Nominal battery voltages (V) 12 V DC
Maximum Input (V) 3 amps DC/AC
Input Power Source (V) Solar Panel, or 16 V/40 VA "Doorbell" transformer
Maximum Charging Output (V) 3 amps DC
Maximum Pulse Current(A) 10 amps
Self Consumption < 50 ma from battery at full pulse
Efficiency >96% over 20% pulse load

 

LED Indicators

  • Unit Operating

Mechanical Specifications


Weight:

0.3 lbs.

Size:

3" X 2" X 1.5"
Connections:

Power #16 AWG Flying Leads
2 X Blue for input -polarity insensitive,
white = Bat+, Blue = Bat-

Operating Temperature:

-40 to 60 deg. C
Humidity: 0 - 90% non-condensing

 

Note: In the interest of continuous product improvement specifications subject to change without notice.

Order Model No:

12 V Model: BD-10
24 V Model: BD-10/24

 

Solar Converters Inc

 


Send to a friend Write a review Request more info
HACKER SAFE certified sites prevent over 99.9% of hacker crime. BizRate Customer Certified (GOLD) Site
Call us for solar panel system design help.
877-878-4060

Se habla Español
LiveZilla Live Help
 

browse by brand

 
 
Why buy from us? Sign up for our Newsletters Save / Earn Money Have a suggestion? Found a bug?

newsletters signup

Monthly Educational Newsletter
Specials
E-Mail:
Sign-Up