Universal Battery UB12350 Sealed AGM 12V 35AH

SEALED-LEAD ACID BATTERIES The state-of-the-art lead-acid battery is the valve-regulated type (sometimes called ‘sealed’ or maintenance-free), which fixes the acid electrolyte in a gel or in an absorptive fiberglass mat. The advantage of this design is that the battery needs no water additions, can be operated in any position, and can be used in close proximity to people and sensitive equipment. Universal Battery is a leader in competitively priced sealed absorbent glass mat (AGM) and gel technology. This new technology provides the following benefits compared to old technology wet batteries:

• Maintenance-free
• Sealed no leak design
• Higher cranking amps
• Lower self discharge
• Greater vibration resistance
• Heavy duty, no corrosion terminals

Terminals:

• - A (Automotive Post)
• - Z (Automotive Post with hole to accept thru bolt) in two heights: Short & Long.
• - L1 (“L” Terminal with clearance hole to accept ¼”thru bolt)
• - L2 (“L” Terminal with clearance hole to accept 5/16 thru bolt)
• - L3 (“L” Terminal with clearance hole to accept 3/8” thru bolt, terminal height 1.2”)
• - L4 (“L” Terminal with clearance hole to accept 3/8” thru bolt, terminal height 1.5”)
• - C (Marine Combo terminal: Automotive Post and stud 5/16”)
• - S (Stud 3/8”)
• - F (Marine Flag terminal to accept 3/8” thru bolt)
  • F1 = .187" tab
  • F2 = .25" tab
  • F6 = Pressure Contact
• - B1 (Nut and Bolt Post)
• - B2 (Internal Threaded Post)
• - WL (Wire Lead)

*Please tell us what type of terminal you want to have on your battery if more than one option is listed. Put this information in the comments section of your order when you add the product to the cart or tell your sales person.

See Warranty information in Datasheets section above.