Phocos MPPT 100/20 Solar Charge Controller

Phocos MPP-Tracker
Solar Charge Controllers
MPPT 100/20

With innovative maximum power point tracking technology, Phocos' MPP-Tracker ensures maximum performance from your solar panel array at all times and in all weather conditions. This MPPT charge controller can yield an energy gain of up to 30% from your PV array (with the average gain being 10%-25%). MPPT includes a sweep function which runs through the whole solar panel voltage range once every 2 hours to find the point of the absolute maximum power output. When a Master Controller is used, up to 16 MPPTs can be operated in parallel. This will enable you to increase your system capacity substantially. In addition, the charge regulation of each MPPT unitcan be controlled by a master controller via a data bus. The temperature-compensated three-stage I-U curve charge regulation algorithm significantly extends the lifespan of your battery. The possibility to use less expensive grid-feed solar panels with up to 95V open circuit voltage for 12V or 24V stand-alone systems will significantly reducethe cost of the total system.

Features

• Maximum Power Point Tracking technology increases the efficiency of your photovol100taic system
• Electronic protection (reverse polarity, over-current, short circuit, over-temperature)
• High efficiency
• DIN rail compatible
• Negative ground