Morningstar Sunsaver MPPT Charge Controller

Morningstar Sunsaver MPPT Charge Controller
List Price: $278.00
Our Price: $232.75     Save: $45.25 (16%)
Model: SUNSAVER MPPT
Brand: Morningstar Corp
Availability: In Stock
Quantity

Estimate Shipping.

Need help selecting components and designing your system?
Give our Knowledgeable Sales Folks a call at 877-878-4060.

Basic Stats click to view hide

Amps: 15 A
 Our Code: MORSS-MPPT

Reviews click to view hide

If you own this product write a review!

Excellent value! A+A+A+A+ by Tracy Norris
Rating:

I purchased this controller for my (admittedly cheap) introduction into solar energy. I first bought Continue...

Add-Ons & Accessories click to view hide

These items are commonly used with the Morningstar Sunsaver MPPT Charge Controller

Details click to view hide


Morningstar, charge controller, mpptMorningstar Corporation
Sunsaver MPPT Charge Controller

Solar Controller with Maximum Power Point Tracking

New!Morningstar, mppt, solar charge controller, sunsaver

Morningstar’s SunSaver MPPT solar controller with TrakStar Technology™ is an advanced maximum power point tracking (MPPT) battery charger for off-grid photovoltaic (PV) systems. The controller features a smart tracking algorithm that maximizes the energy harvest from the photovoltaic system and also provides load control to prevent over discharge of the battery. The SunSaver MPPT is well suited for both professional and consumer PV applications. Its charging process has been optimized for long battery life and improved system performance. This product is epoxy encapsulated for environmental protection, may be adjusted by the user via four settings switches or connection to a personal computer, and has an optional remote meter and battery temperature sensor.

Click HERE to try the Morningstar String Calculator!

 

Highlights of the Controller Features:

  • Maximizes Energy Harvest
    TrakStar MPPT Technology features:
    • peak efficiency of over 97%
    • almost no power losses
    • recognition of multiple power peaks during shading or mixed PV arrays• excellent performance at low solar insolation levels
  • Converts 36V or 24V PV Arrays
    Provides a means to use up to a 36V PV array to charge either a 24V or 12V battery.
  • Lower System Cost
    Less expensive than other MPPT controllers and is affordable in smaller PV systems up to 400Wp. Allows system costs to be reduced by down-sizing the PV array, using on-grid or thin film modules and decreasing
    cable sizes.
  • Use of High Voltage Modules
    Enables the use of high voltage and thin film modules for off-grid battery charging.
  • Includes Load Control
    Automatically disconnects loads when the battery has been discharged to a low state of charge.
  • Longer Battery Life
    Efficient MPPT tracking and 4-stage charging increases battery life.
  • Data Logging
    Records key operating parameters of the PV system and includes 30 days of data logging.
  • Diversion Control Capability
    May be programmed to control charging using an auxiliary DC resistive load.

Please Note:

The SunSaver MPPT can accept 12V , 24V, or 36V nominal off-grid solar module arrays. The solar array nominal voltage must be equal to or greater than the nominal battery voltage. For 24V systems, a 24V or 36V nominal solar array must be used. Grid-tie solar module(s) may be used with the Sunsaver MPPT if the open circuit voltage (Voc) does not exceed the SS-MPPT 75 V maximum solar input rating.

 


Sunsaver MPPT charge controller

 

Technical Specifications

Electrical
Peak Efficiency 97.5%
Nominal Battery Voltage 12 or 24 volts
Max. Battery Current 15 amps
Battery Voltage Range 7-36 volts
Max. PV Open Circuit Voltage 75 volts
Nominal Max. PV Input  
   12 volt battery 200 Watts
   24 volt battery 400 Watts
Output Rating 15 amps load control
Self Consumption 35 milliamps
Transient Surge Protection 4 x 1500 Watts
Environmental
Operating Temperature –40°C to +60°C
Storage Temperature –55°C to +100°C
Humidity 100% non-condensing
Tropicalization Epoxy encapsulation
Conformal coating
Marine rated terminals
Mechanical
Dimensions 16.9 x 6.4 x 7.3 cm
6.6 x 2.5 x 2.9 inch
Weight 0.60 kg / 1.3 lbs
Power Terminal 16 mm2 / #6 AWG
Enclosure Die cast aluminum
with plastic cover

 

 

Morningstar Corporation


Send to a friend Write a review Request more info
HACKER SAFE certified sites prevent over 99.9% of hacker crime. BizRate Customer Certified (GOLD) Site
Call us for solar panel system design help.
877-878-4060

Se habla Español
LiveZilla Live Help
 

browse by brand

 
 
Why buy from us? Sign up for our Newsletters Save / Earn Money Have a suggestion? Found a bug?

gallery hot shot

from Sascha D's album
Yellow LEDs on the surge arrestor indicates that they are all active. No red error LEDs means none of the surge protection has y

Yellow LEDs on the ...