1/2" Strain Relief with 1 Round Hole

Need help selecting components and designing your system?
Give our Knowledgeable Sales Folks a call at 877-878-4060.

Basic Stats click to view hide

Our Code: GENSR-1HOLE

If you own this product write a review!

Is what it is... by Michael Riewer

Rating:

..but I still have to go to the local hardware store to get the locking ring, which also has these f Continue...

These items are commonly used with the 1/2" Strain Relief with 1 Round Hole

Add-Ons

Strain Reliefs
Use the 1/2" threaded connectors to provide a waterproof entrance or exit for wiring on PV module junction boxes, outdoor combiner boxes, and junction boxes. Use the 3/4"connector for larger cables up to 5/8"diameter. They are made of Nylon with Buna-N seals and are resistant to salt water, weak acids, weak alkalis, alcohol, ether, esters, ketones, and mineral, animal and vegetable oils. The threads are 1/2"or 3/4"NPT. Non-corrosive and suitable for direct burial installations. The two-hole 1/2"connector is designed for use with two #10 or #12 type USE conductors like the ones used for MultiContact PV output cables. UL listed. Suitable for use in NEMA 4, 6 and 12 applications. Locknuts not included.
1/2" Strain Relief with 1 Round Hole holds USE #12 & #10	3/4" Strain Relief with 1 Round Hole holds cable 0.4 - 0.7 inches in cross section
1/2" Strain Relief with 2 Round Holes